{"product_id":"pylontech-us5000b-4-8kwh-48v-battery","title":"PylonTech 4.8 kWh US5000B Lithium-ion battery","description":"\u003cp\u003eBuilding a home, bach or off-grid battery bank? The Pylontech US5000B is a 4.8 kWh, 48 V LiFePO4 battery module that slots straight into a 19\" rack and talks directly to your Victron system over CAN bus — so your inverter and chargers always know exactly what the battery is doing. Start with one module and stack up to sixteen as your power needs grow.\u003c\/p\u003e\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 4.8 kWh (48 V nominal, ~100 Ah)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChemistry:\u003c\/strong\u003e Lithium Iron Phosphate (LiFePO4)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDepth of discharge:\u003c\/strong\u003e up to 95%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt-in BMS\u003c\/strong\u003e with over-discharge, over-charge, over-current and high\/low-temperature protection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eForm factor:\u003c\/strong\u003e 19\" rack-mountable, self-cooling (no fans)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommunication:\u003c\/strong\u003e CAN bus \/ RS485 — works seamlessly with Victron inverters and GX devices\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExpandable:\u003c\/strong\u003e connect up to 16 modules in parallel for more capacity and power\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eUS5000B features\u003c\/h3\u003e\n\u003cp\u003eCommunicates seamlessly with Victron inverters via CAN bus.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBuilt-in soft-start function able to reduce current strike when inverter need to start from the battery\u003c\/li\u003e\n\u003cli\u003eDual active protection on the BMS level\u003c\/li\u003e\n\u003cli\u003eAutomatic address setting when connecting in multi-group\u003c\/li\u003e\n\u003cli\u003eSupport wakeup by 5~12V signal from RJ45 port\u003c\/li\u003e\n\u003cli\u003eSupport upgrade battery module from the upper controller via CAN or RS485 communication\u003c\/li\u003e\n\u003cli\u003eEnable 95% depth of discharge, available for the inverter which completely follows Pylontech latest protocol to operate.\u003c\/li\u003e\n\u003cli\u003eThe module is non-toxic, non-pollution and environmentally friendly\u003c\/li\u003e\n\u003cli\u003eThe cathode material is made from LiFePO4 with safety performance and long cycle life.\u003c\/li\u003e\n\u003cli\u003eThe battery management system (BMS) has protection functions including over-discharge, over-charge, over-current and high\/low temperature\u003c\/li\u003e\n\u003cli\u003eThe system can automatically manage the charge and discharge state and balance the voltage of each cell.\u003c\/li\u003e\n\u003cli\u003eFlexible configuration, multiple battery modules can be in parallel for expanding capacity and power\u003c\/li\u003e\n\u003cli\u003eAdopted self-cooling mode rapidly reduced system entire noise\u003c\/li\u003e\n\u003cli\u003eThe module has less self-discharge, up to 6 months without charging it on the shelf, no memory effect, and excellent performance of shallow charge and discharge.\u003c\/li\u003e\n\u003cli\u003eSmall size and lightweight. Standard 19-inch embedded designed module is comfortable for installation and maintenance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eStacking \u0026amp; compatibility\u003c\/h3\u003e\n\u003cp\u003eThe US5000B works alongside Pylontech's other 48 V modules. For the same type of module, always use the latest production unit as the master:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMixture using master-battery priority: US5000 \u0026gt; UP5000 \/ US3000C \/ US2000C \u0026gt; US3000 \/ US2000\u003c\/li\u003e\n\u003cli\u003eMaster battery (1st): US5000\u003c\/li\u003e\n\u003cli\u003eSlave 2nd–8th: US5000 \/ UP5000 \/ US3000C \/ US2000C \/ US3000 \/ US2000\u003c\/li\u003e\n\u003cli\u003eSlave 9th–16th: US5000 \/ UP5000 \/ US3000C \/ US2000C\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eComplete your system\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.luxsolar.co.nz\/products\/victron-inverter-chargers-multiplus-ii-48v-current-transformer\"\u003eVictron MultiPlus-II inverter\/charger\u003c\/a\u003e — the 48 V partner for off-grid and hybrid setups.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.luxsolar.co.nz\/products\/cerbo-gx-mk2\"\u003eCerbo GX MK2\u003c\/a\u003e — monitor state of charge and your whole system from your phone via the free VRM app.\u003c\/li\u003e\n\u003cli\u003eAdd the matching \u003ca href=\"https:\/\/www.luxsolar.co.nz\/products\/pylontech-4-8-kwh-us5000b-lithium-ion-battery-copy\"\u003ePylontech 48 V cable pack\u003c\/a\u003e and a \u003ca href=\"https:\/\/www.luxsolar.co.nz\/products\/class-t-fuses-and-accessories-fuse-holders-etc\"\u003eClass T fuse\u003c\/a\u003e to wire it in safely.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNot sure how to size your bank? Plan the whole system in a few minutes with \u003ca href=\"https:\/\/www.luxsolar.co.nz\/pages\/lux-solar-anykit\"\u003eAnyKit™\u003c\/a\u003e, or email \u003ca href=\"mailto:technical@luxsolar.co.nz?Subject=Pylontech%20US5000B\"\u003etechnical@luxsolar.co.nz\u003c\/a\u003e and we'll help you spec it.\u003c\/p\u003e","brand":"Rise Energy","offers":[{"title":"Default Title","offer_id":46190222213283,"sku":"US5000B4.8","price":2999.99,"currency_code":"NZD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1764\/6413\/files\/Pylontech_48V_100AH_LiFePo4_Lithium_Battery_US5000B.jpg?v=1756540638","url":"https:\/\/www.luxsolar.co.nz\/products\/pylontech-us5000b-4-8kwh-48v-battery","provider":"LUX Solar","version":"1.0","type":"link"}