{"product_id":"victron-inverter-charger-multi-rs19-solar","title":"Victron Multi RS19 Solar 19\" Rack Mountable","description":"\u003cp\u003eThe Victron Multi RS19 Solar 48\/6000\/100-450\/100 230V is a lightweight, high-frequency 6 kVA inverter\/charger with two 450 V solar trackers built in, for up to 6 kW of solar on a 48 V battery bank. It's the 19\" rack-mount version of the Multi RS Solar, and runs quietly and efficiently with low standby power.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFree NZ shipping\u003c\/strong\u003e on Victron inverter\/chargers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e the Multi RS19 Solar is not recommended for marine or coastal installations.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt-in 450 V dual solar trackers\u003c\/strong\u003e: two independent trackers at 65 to 450 V, 3 kW each, give you 6 kW of solar without a separate charge controller. Add more later with extra solar chargers or PV inverters on the AC output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade for 19\" battery racks\u003c\/strong\u003e: fits a standard 19\" rack next to rack-mount 48 V batteries for a compact installation, with a BMS-Can port to connect to them\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6 kVA with strong surge power\u003c\/strong\u003e: 4800 to 5300 W continuous at 25 °C depending on battery voltage, and 9 kW peak for 3 seconds to handle start-up surges\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBackup, off-grid and generator modes\u003c\/strong\u003e: switches to battery power during a grid outage, runs with no grid connection at all, or controls a generator to keep its run-hours down\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePowerControl \u0026amp; PowerAssist\u003c\/strong\u003e: set a maximum grid or generator current and the Multi RS reduces charging to stay under it, then adds battery power when loads peak\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUp to 100 A battery charging\u003c\/strong\u003e: 88 A from grid or generator, and up to 100 A combined with solar, with a battery temperature sensor included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo AC outputs\u003c\/strong\u003e: a second output for non-critical loads runs straight from the AC input, so those loads don't drain the battery during an outage\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisplay, Bluetooth and remote monitoring\u003c\/strong\u003e: see every reading on the built-in display or in the VictronConnect app, with trend history. Connect a GX device such as the Cerbo GX for system monitoring, data logging and remote firmware updates.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eContinuous output power\u003c\/td\u003e\n\u003ctd\u003e4800 to 5300 W @ 25 °C (46 to 52 V DC), 4500 W @ 40 °C, 3000 W @ 65 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePeak power\u003c\/td\u003e\n\u003ctd\u003e9 kW for 3 seconds, 7 kW for 4 minutes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput\u003c\/td\u003e\n\u003ctd\u003e230 VAC ± 2%, 50 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEfficiency\u003c\/td\u003e\n\u003ctd\u003e96.5% at 1 kW, 94% at 5 kW\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eZero load power consumption\u003c\/td\u003e\n\u003ctd\u003e20 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSolar input\u003c\/td\u003e\n\u003ctd\u003e2 trackers, 65 to 450 V (450 V max open circuit), 3 kW each, 6 kW total\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum charge current\u003c\/td\u003e\n\u003ctd\u003e88 A from AC, 100 A total (AC + solar)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTransfer switch\u003c\/td\u003e\n\u003ctd\u003e50 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDC input voltage range\u003c\/td\u003e\n\u003ctd\u003e38 to 62 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThree-phase and parallel\u003c\/td\u003e\n\u003ctd\u003eThree-phase with one unit per phase. Parallel not supported.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProtection category\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (H × W × D)\u003c\/td\u003e\n\u003ctd\u003e133 × 483 × 430 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e12.2 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003eFull specifications are in Victron's \u003ca href=\"https:\/\/www.victronenergy.com\/upload\/documents\/Datasheet-Multi-RS19-Solar-EN.pdf\" target=\"_blank\" rel=\"noopener\"\u003eMulti RS19 Solar datasheet (PDF)\u003c\/a\u003e.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis unit is supplied after a chat with our technical team, so we can make sure it suits your system. Email \u003ca href=\"mailto:technical@luxsolar.co.nz?Subject=Multi%20RS19%20Solar\"\u003etechnical@luxsolar.co.nz\u003c\/a\u003e to get started.\u003c\/p\u003e","brand":"VICTRON","offers":[{"title":"48\/6000\/100-450\/100 230V","offer_id":67593712730275,"sku":"PMR482602030","price":3266.99,"currency_code":"NZD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1764\/6413\/files\/Multi_RS19_Solar_400_front__1414.png?v=1790922375","url":"https:\/\/www.luxsolar.co.nz\/products\/victron-inverter-charger-multi-rs19-solar","provider":"LUX Solar","version":"1.0","type":"link"}