Victron Blue Smart IP67 Charger - Waterproof - NZ Plug
Victron Blue Smart IP67 Charger - Waterproof - NZ Plug
SKU: Blue Smart IP67 Charger 12/13 (1) AU/NZ Plug | BPC121347016
Couldn't load pickup availability
Shipping $ & Timeframe
Shipping $ & Timeframe
Free Shipping New Zealand wide.
Orders are shipped Mondays to Fridays and take 1-3 working days to arrive. Orders received before midday ship out same-day.
Warranty & Returns
Warranty & Returns
5 Year Warranty
We have a 7 day change of mind return policy, subject to a restocking fee.
Datasheets, Manuals, Certifications
Datasheets, Manuals, Certifications
The Blue Smart IP67 Waterproof Charger is the new professional battery charger with built-in Bluetooth. The Blue Smart IP67 Waterproof Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans.
What you get
- Fully waterproof, shockproof and ignition-protected IP67 housing — safe for engine bays, lockers, and exposed marine installations
- Built-in Bluetooth to monitor voltage and current, change settings, and update the charger from your phone, tablet or laptop
- Adaptive 7-step charge algorithm that maintains battery health and extends battery life
- Up to 92% efficiency, dropping to under 1 watt once the battery is fully charged
- Recovers deeply discharged ‘dead’ batteries
- AU/NZ plug for New Zealand wall sockets
- Available in 12V and 24V models across a range of charge currents
The battery is charged, smartly... to perfect condition
The seven-step charging algorithm gets the best out of your battery. The charger gives the battery the power it needs, maintains its health, ensures better performance... and a longer life.
The Blue Smart IP67 Battery Charger is a wireless solution to monitor voltage and current, change settings, and update the charger when new features become available. With Bluetooth, the functionality of the IP67 charger is enhanced and is similar to that of our IP22 and IP65 chargers. Water, oil, or dirt will not damage the Blue Smart IP67 Charger. The casing is made of cast aluminum, and the electronics are molded in resin.
Recovery of deeply-discharged 'dead' batteries
Unlike other brands, the Blue Smart IP67 Charger Waterproof will attempt to recharge a deeply-discharged battery by force-feeding it with a low current. Normal charging will then be resumed as soon as there is sufficient voltage across the battery terminals.
Completely encapsulated: waterproof, shockproof, and ignition protected. Water, oil, or dirt will not damage the Blue Smart IP67 Battery Charger. Setting a new industry standard: 92% efficiency or better, these chargers waste three to four times less heat. Once the battery is fully charged, power consumption reduces to less than a watt, some five to ten times better than the industry standard.
Check the status of your battery remotely
Blue Smart IP67 Charger Waterproof is equipped with built-in Bluetooth, so the status of the charger and the battery can be checked on a smartphone, tablet or laptop. All settings of the charger can be configured with the VictronConnect app.
Which model do I need?
Every Blue Smart IP67 model is a single-output charger with an AU/NZ plug. The right choice comes down to your battery bank voltage and how quickly you want to charge:
- Match the voltage — choose a 12V charger for a 12V battery, or a 24V charger for a 24V battery.
- Higher amps charge faster — the second number is the charge current (e.g. 12/25 = 25A). A higher current refills a larger battery in less time, while a lower current is ideal for smaller batteries and trickle/maintenance duty.
If you're not sure which suits your setup, email technical@luxsolar.co.nz and we'll point you to the right one.
1 output with AU/NZ Plug.
Free pickup from our Panmure, Auckland store, or fast NZ-wide delivery.

Plan your Solar in under 2 Minutes
LUX Solar's AnyKit Builder helps you design a pre-wired kit for your caravan, boat, campervan, or small tiny home. No Experience Needed!
In just minutes, create a custom electrical setup tailored to your use case. Select the major components you would like and LUX AnyKit automatically figures out all the details such as product compatibility, required cables, fuses, lugs, circuit breakers and more.