Victron Multi RS19 Solar 19" Rack Mountable
Victron Multi RS19 Solar 19" Rack Mountable
SKU: Multi RS19 Solar 48/6000/100-450/100 230V | PMR482602030
Couldn't load pickup availability
Shipping $ & Timeframe
Shipping $ & Timeframe
Free Shipping New Zealand wide.
Orders are shipped Mondays to Fridays and take 1-3 working days to arrive. Orders received before midday ship out same-day.
Warranty & Returns
Warranty & Returns
5 Year Warranty
We have a 7 day change of mind return policy, subject to a restocking fee.
Datasheets, Manuals, Certifications
Datasheets, Manuals, Certifications
The Victron Multi RS19 Solar 48/6000/100-450/100 230V is a lightweight, high-frequency 6 kVA inverter/charger with two 450 V solar trackers built in, for up to 6 kW of solar on a 48 V battery bank. It's the 19" rack-mount version of the Multi RS Solar, and runs quietly and efficiently with low standby power.
Free NZ shipping on Victron inverter/chargers.
Please note: the Multi RS19 Solar is not recommended for marine or coastal installations.
Key features
- Built-in 450 V dual solar trackers: two independent trackers at 65 to 450 V, 3 kW each, give you 6 kW of solar without a separate charge controller. Add more later with extra solar chargers or PV inverters on the AC output.
- Made for 19" battery racks: fits a standard 19" rack next to rack-mount 48 V batteries for a compact installation, with a BMS-Can port to connect to them
- 6 kVA with strong surge power: 4800 to 5300 W continuous at 25 °C depending on battery voltage, and 9 kW peak for 3 seconds to handle start-up surges
- Backup, off-grid and generator modes: switches to battery power during a grid outage, runs with no grid connection at all, or controls a generator to keep its run-hours down
- PowerControl & PowerAssist: set a maximum grid or generator current and the Multi RS reduces charging to stay under it, then adds battery power when loads peak
- Up to 100 A battery charging: 88 A from grid or generator, and up to 100 A combined with solar, with a battery temperature sensor included
- Two AC outputs: a second output for non-critical loads runs straight from the AC input, so those loads don't drain the battery during an outage
- Display, Bluetooth and remote monitoring: see every reading on the built-in display or in the VictronConnect app, with trend history. Connect a GX device such as the Cerbo GX for system monitoring, data logging and remote firmware updates.
Specifications
| Continuous output power | 4800 to 5300 W @ 25 °C (46 to 52 V DC), 4500 W @ 40 °C, 3000 W @ 65 °C |
| Peak power | 9 kW for 3 seconds, 7 kW for 4 minutes |
| Output | 230 VAC ± 2%, 50 Hz |
| Efficiency | 96.5% at 1 kW, 94% at 5 kW |
| Zero load power consumption | 20 W |
| Solar input | 2 trackers, 65 to 450 V (450 V max open circuit), 3 kW each, 6 kW total |
| Maximum charge current | 88 A from AC, 100 A total (AC + solar) |
| Transfer switch | 50 A |
| DC input voltage range | 38 to 62 V |
| Three-phase and parallel | Three-phase with one unit per phase. Parallel not supported. |
| Protection category | IP20 |
| Dimensions (H × W × D) | 133 × 483 × 430 mm |
| Weight | 12.2 kg |
Full specifications are in Victron's Multi RS19 Solar datasheet (PDF).
This unit is supplied after a chat with our technical team, so we can make sure it suits your system. Email technical@luxsolar.co.nz to get started.
Plan your Solar in under 2 Minutes
LUX Solar's AnyKit Builder helps you design a pre-wired kit for your caravan, boat, campervan, or small tiny home. No Experience Needed!
In just minutes, create a custom electrical setup tailored to your use case. Select the major components you would like and LUX AnyKit automatically figures out all the details such as product compatibility, required cables, fuses, lugs, circuit breakers and more.