SOK Lithium Iron Phosphate (LiFePO4) Battery SOK Battery 12 -24 Volt 100 to 206 Ah

The SOK bluetooth 12v 100Ah LiFePO4 battery is the ideal compact deep cycle solar battery for RVs, motorhomes, caravans and off-grid.

Features:

• 7-Year Manufacturer Warranty 
• 12V LiFePO4 Deep Cycle Lithium Iron Phosphate Battery, 100ah Capacity
• Built-in Smart Battery Management System (BMS)
• Bluetooth
• 4000~8000 cycle life & Maintenance-free
• Over charge & over discharge protection
• Over current & short circuit protection.
• Detachable cover, user serviceable BMS and cells.
• High & low temperature disconnects.
• Connect in parallel (up to four units) or series (24v & 48v)

The LiFePO4 prismatic cells in all SOK batteries are a genuine Grade A product that will provide most users with a usable lifespan of up to and possibly beyond 20 years. Test data here

SOK batteries are renowned for their high quality construction .The cells, BMS, wiring and busbars are all thoughtfully designed and integrated resulting in a battery that is not only safer, but is more reliable and durable.

Warranty: SOK batteries are manufacturer backed. We have the direct support from the SOK team in China, and with the team in New Zealand, we'll work get issues and technical queries resolved prompty. 

Connecting in 24v or 48v Battery Banks? We recommend a victron battery balancer

DISCLAIMER batteries are shipped at 30% SOC so you need to fully charge it when you get it before running anything

LiFePO4 Settings (12 Volt)

Victron’s Li-Ion profile is NOT sufficient for non-Victron LiFePO4 batteries.  Enter configuration and turn on “ADVANCED” switch, then select “Custom” charge preset.  Then click “Advanced Battery Settings”.

The battery preset should be set to “User Defined”.  Turn on “Expert Mode” switch.

Charge Voltage Settings:
Absorption Voltage: 14.6v
Float Voltage: 13.8v
Storage Voltage: 13.6v
Recondition Voltage: Disabled
BatterySafe: Disabled

Voltage Compensation:
Temperature Compensation: Disabled

Bulk:
Bulk Time Limit: 24 Hours
Re-bulk Current: Enabled, set to full output current of charger, typically 25A

Absorption:
Absorption Duration: Fixed
Absorption Time: 1 Hr
Repeated Absorption: Every 7 days

Recondition:
Recondition Stop Mode: Fixed time
Recondition Duration: 15M (This is the minimum allowed setting.  It is already disabled in charge voltage settings, but set to this as a safety precaution)